B&K 1201 SR Video Modulator (Probably works)
See information on this unit from Radio-Electronics Magazine, October 1989
3M (Scotch) 150, 1800 ft. Reels of 1/4" Recording Tape.
These are from a logging recorder. I bulk erased them as used them.
I have about 100 reels I don't need any more.
If someone wants the Tape Machine below, he gets first refusal on these tapes.
Sully 280, 2-Track Stereo Tape Recorder
(Rack not included.)
I was restoring it until I went over to digital recording.
The photo-copied manual is included.
It should be possible to get it working, but experience with professional tape recorders may be necessary.
Several Assorted Slave Clocks - Definitely As-Is
Standard 1400 Master Clock to drive Slave Clocks
I don't know if I have slave clocks for this, but we can look.
24 Volt Battery Charger
This thing is pretty hefty, but I don't use 24 Volt batteries.
Blonder-Tongue Commercial Channel 13 TV Antenna in Unopened Box
The box is about 78 inches long.
Bogen 100 Watt P.A Amplifier
I used this for the speeches after the Masontown PA Memorial Day Parade for about 10 years.
Last year the controls were so dirty it was useless. I don't trust control cleaner to last year after year, so I bought a newer amp.
Still, an occasional shot of control cleaner should make this one fine for non-critical uses.
Besides the common low inpedances, it has a 70-Volt oputput which I connected to two 1/4" jacks.
Rauland Cone Speaker with Horn
The opening is 20 inches square. I am pretty sure this is a 70-Volt speaker.
I used it for testing P.A. amps. It worked fine the last time I used it. It is LOUD!
Dell 15 inch VGA Monitor
I have three or four of these to get rid of. They are used, tested and working.
Mitsobishi XD206U Video Projector
I have three of these to get rid of. They are used, tested and working.
I have no remote controls. I cannot guarantee the remaining life of the lamps, but they work now.
Closeup of the control panel showing the model number.
Closeup of the rear panel. I can supply line cords.